Fitting, replacement and upgrades · DE5

Battery backup and safety upgrades in Ripley

We upgrade electric roller doors of any make in Ripley and elsewhere in Derbyshire, from battery backup to new photocells. After fitting, the door is tested, and you're shown how to check the safety devices each month.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Ripley, DE5 and DE75
Area: Derbyshire

Roller door control box and battery backup unit mounted on a garage wall

Computer-generated image

What should I know about battery backup and safety upgrades in Ripley?

Where a door has never had photocells, any extra wiring needed is priced before we come out.
We check your motor and control box are compatible with the upgrade before the visit is booked, not on the day.
Photocells mounted either side of the opening stop the door closing while anything is breaking the beam.
After fitting, the door is tested to check it stops and reverses as it should with the new devices.

How does it work in Ripley?

On the day, the upgrade is fitted and the door is tested. If anything else needs attention, the parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do battery backup and safety upgrades cost in Ripley?

Item	Guide price (inc VAT)	Ex VAT
Battery backup unit, fitted to an existing electric door	£149–£279	£124.17–£232.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Ripley and nearby

If your garage is in Ripley (DE5 and DE75), you can get a guide price online now, and we confirm any survey or visit date in writing. Ripley is about 8 miles from Derby.

Nearby, we also take enquiries from Heanor, Belper and Alfreton.

Rules that apply in Ripley

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Battery backup and safety upgrades in Ripley: questions

How much is a visit in Ripley?

Prices for battery backup and safety upgrades start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Ripley as elsewhere we cover.

Do you cover Ripley?

Yes. Ripley is part of the area we cover in Derbyshire, including DE5 and DE75. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you repair roller doors you did not fit in Ripley?

Yes. We repair roller garage doors of any make in Ripley and across DE5 and DE75, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

What should I do while I wait for a visit in Ripley?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Ripley visit date is confirmed in writing.

How often should I test the safety edge and photocells?

Test them monthly, following the manufacturer's instructions for your door. The aim is to confirm that the door stops or reverses when the safety edge meets an obstruction, and won't close while the photocell beam is broken. If either test fails, don't keep using the door until it has been checked, and request a visit.

Do I still need the manual override if I have a battery backup?

Yes. A battery unit covers a limited number of cycles, and it can run down during a long power cut or as the battery ages. Keep the override handle somewhere you can find it in the dark, and make sure everyone who uses the garage knows where it is and how it works.