Fitting, replacement and upgrades · WN2

Battery backup and safety upgrades in Hindley

Battery backup and safety upgrades in Hindley are priced item by item, so you can choose one or combine them on one visit. Tell us about your control box and we'll confirm compatibility for homes in the WN2 area first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Hindley, WN2, WN1 and WN3
Area: Greater Manchester

Roller door control box and battery backup unit mounted on a garage wall

Computer-generated image

What should I know about battery backup and safety upgrades in Hindley?

A battery backup unit lets the door run for a limited number of cycles when the mains power is off.
We check your motor and control box are compatible with the upgrade before the visit is booked, not on the day.
Photocells mounted either side of the opening stop the door closing while anything is breaking the beam.
The battery charges from the mains while the power is on, so it's ready the next time there's a power cut.

How does it work in Hindley?

On the day, the upgrade is fitted and the door is tested. If anything else needs attention, the parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do battery backup and safety upgrades cost in Hindley?

Item	Guide price (inc VAT)	Ex VAT
Battery backup unit, fitted to an existing electric door	£149–£279	£124.17–£232.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hindley and nearby

Hindley is within the area we cover in Greater Manchester. Homes in WN2, WN1 and WN3 get the same survey, quote and fitting process as everywhere else we work. For reference, Hindley sits roughly 15 miles from Manchester.

We also cover Wigan (2 miles), Westhoughton (3 miles) and Leigh (4 miles).

Rules that apply in Hindley

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Battery backup and safety upgrades in Hindley: questions

Can I message you a photo of my garage in Hindley?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Hindley. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

How much is a visit in Hindley?

Prices for battery backup and safety upgrades start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Hindley as elsewhere we cover.

What should I do while I wait for a visit in Hindley?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Hindley visit date is confirmed in writing.

Can a battery backup be fitted to a manual roller door?

No. A manual door has no motor or control box for a battery unit to power, because springs in the barrel balance the curtain and you lift it by hand. If you'd like powered operation, a manual-to-electric conversion may be possible when the curtain, barrel, box and guides are sound and compatible.

Can safety devices be added to an older electric door?

Usually, if a compatible safety edge or photocells are available for the control box. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether it can be done, and the price, before booking the visit.