Fitting, replacement and upgrades · NP11

Battery backup and safety upgrades in Risca

We upgrade electric roller doors of any make in Risca and elsewhere in Gwent, from battery backup to new photocells. After fitting, the door is tested, and you're shown how to check the safety devices each month.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Risca, NP11 and NP10
Area: Gwent

Roller door control box and battery backup unit mounted on a garage wall

Computer-generated image

What should I know about battery backup and safety upgrades in Risca?

Photocells mounted either side of the opening stop the door closing while anything is breaking the beam.
A battery backup unit lets the door run for a limited number of cycles when the mains power is off.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door if it touches something while closing.
You're shown how to test the safety edge and photocells monthly, following the manufacturer's instructions for your door.

How does it work in Risca?

On the day, the upgrade is fitted and the door is tested. If anything else needs attention, the parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do battery backup and safety upgrades cost in Risca?

Item	Guide price (inc VAT)	Ex VAT
Battery backup unit, fitted to an existing electric door	£149–£279	£124.17–£232.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Risca and nearby

We survey and fit roller garage doors across Risca, including NP11 and NP10, as part of our coverage in Gwent. Risca lies around 5 miles from Newport.

Nearby, we also take enquiries from Newport (Gwent), Cwmbran and Caerphilly.

Rules that apply in Risca

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Battery backup and safety upgrades in Risca: questions

Do you charge more for Risca than other towns in Gwent?

No. Guide prices are the same for Risca as for anywhere else we cover in Gwent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you repair roller doors you did not fit in Risca?

Yes. We repair roller garage doors of any make in Risca and across NP11 and NP10, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you cover Risca?

Yes. Risca is part of the area we cover in Gwent, including NP11 and NP10. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I message you a photo of my garage in Risca?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Risca. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How many times will a battery backup open the door?

It depends on the unit, the motor and the size and weight of the door. A battery backup is designed for a limited number of cycles in a power cut, not for running the door for days. If you need the door after the battery runs down, use the manual override as the manufacturer's instructions describe.

How often should I test the safety edge and photocells?

Test them monthly, following the manufacturer's instructions for your door. The aim is to confirm that the door stops or reverses when the safety edge meets an obstruction, and won't close while the photocell beam is broken. If either test fails, don't keep using the door until it has been checked, and request a visit.