Fitting, replacement and upgrades · YO21

Battery backup and safety upgrades in Whitby

If the electric door on your garage in Whitby has no photocells, or a worn safety edge, an upgrade visit can put that right. We cover homes in North Yorkshire, and any other parts the door needs are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Whitby, YO21 and YO22
Area: North Yorkshire

Roller door control box and battery backup unit mounted on a garage wall

Computer-generated image

What should I know about battery backup and safety upgrades in Whitby?

Photocells mounted either side of the opening stop the door closing while anything is breaking the beam.
You're shown how to test the safety edge and photocells monthly, following the manufacturer's instructions for your door.
We check your motor and control box are compatible with the upgrade before the visit is booked, not on the day.
After fitting, the door is tested to check it stops and reverses as it should with the new devices.

How does it work in Whitby?

On the day, the upgrade is fitted and the door is tested. If anything else needs attention, the parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do battery backup and safety upgrades cost in Whitby?

Item	Guide price (inc VAT)	Ex VAT
Battery backup unit, fitted to an existing electric door	£149–£279	£124.17–£232.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Whitby and nearby

If your garage is in Whitby (YO21 and YO22), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Whitby sits roughly 41 miles from York.

Looking from a neighbouring town? We also cover Scarborough (17 miles) and Redcar (20 miles).

Rules that apply in Whitby

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Battery backup and safety upgrades in Whitby: questions

Can I message you a photo of my garage in Whitby?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Whitby. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you repair roller doors you did not fit in Whitby?

Yes. We repair roller garage doors of any make in Whitby and across YO21 and YO22, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you cover Whitby?

Yes. Whitby is part of the area we cover in North Yorkshire, including YO21 and YO22. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What should I do while I wait for a visit in Whitby?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Whitby visit date is confirmed in writing.

How often should I test the safety edge and photocells?

Test them monthly, following the manufacturer's instructions for your door. The aim is to confirm that the door stops or reverses when the safety edge meets an obstruction, and won't close while the photocell beam is broken. If either test fails, don't keep using the door until it has been checked, and request a visit.

Can safety devices be added to an older electric door?

Usually, if a compatible safety edge or photocells are available for the control box. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether it can be done, and the price, before booking the visit.