Sizes, finishes and features · IG11

Double and wide roller garage doors in Barking

Thinking of turning two single garage openings in Barking into one? We can price the door online, and the pier removal and new lintel are priced on survey in Greater London, so you see the full cost before deciding.

Get my guide price Call 0800 088 6248

Guide price: from £1,395 inc VAT
First step: Free survey
Covers: Barking, IG11, IG1 and IG3
Area: Greater London

Wide anthracite roller door across a double garage on a stone house at sunset

Computer-generated image

What should I know about double and wide roller garage doors in Barking?

Decide whether one wide door or two single doors suits how you use the garage, especially if there is a central pier.
Measure the width of your opening at the top, middle and bottom, and use the narrowest figure for your guide price.
Allow extra headroom for a wide door, since larger laths make a bigger roll and need a deeper box.
Check whether the floor slopes or dips across the opening, as a wide bottom rail needs to sit evenly when closed.

How does it work in Barking?

Once you accept the quote, we confirm the fitting date in writing, depending on installer availability. Until you've signed off the quote, no door is ordered and you're under no obligation.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do double and wide roller garage doors cost in Barking?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT
Electric single-skin roller door, double 3.0–4.0 m	£1,795–£2,595	£1,495.83–£2,162.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT
Insulated electric roller door, wide double 4.0–5.5 m	£2,595–£3,995	£2,162.50–£3,329.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Barking and nearby

Our coverage in Greater London includes Barking and the IG11, IG1 and IG3 postcode districts, so the same guide prices and written quotes apply here. Barking is about 10 miles from Westminster.

We also cover East Ham (1 mile), Ilford (2 miles) and Becontree (2 miles).

Rules that apply in Barking

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Double and wide roller garage doors in Barking: questions

How much do double and wide roller garage doors cost in Barking?

Our guide price for double and wide roller garage doors is from £1,395 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Barking as elsewhere we cover.

Can I message you a photo of my garage in Barking?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Barking. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can you remove my old garage door in Barking?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Barking address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Can I get a price for Barking without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can I convert a double up-and-over door to a roller door?

Yes. We remove the old door and its frame, or keep the frame if it's sound, then check the lintel and reveals. The box is fitted behind the lintel and the guides to the reveals. Any extra work, such as a new lintel or building out the reveals, is priced on survey and listed separately in your written quote.

Do I need permission to turn two garage openings into one?

Removing a pier and fitting a longer lintel is structural work, and it may need Building Regulations approval. Whether planning permission is needed depends on your property, so check with your local authority, especially for listed buildings or homes in a conservation area. Our guide to planning and building regulations covers the questions to ask.