Low-headroom roller garage doors in Long Eaton

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

At a survey in NG10 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Long Eaton address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Sometimes that's the simplest answer. If a pipe, cable or light fitting sits just where the box needs to go, moving it may let the box go behind the lintel in the usual way. Any electrical changes should be made by a qualified electrician. We'll point out obstructions at survey and include any work we're doing in the written quote.

Occasionally an opening has no headroom inside, no wall above it outside for a face-fitted box, and too little height to lose any under the lintel. There can still be options, such as altering the lintel, which is priced on survey. If we can't find a sensible solution, we'll tell you plainly rather than fit something that won't work.