Low-headroom roller garage doors in Nelson

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

At a survey in BB9 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Nelson address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Often, yes. Insulated laths make a larger roll than single-skin laths of the same height, so the box is bigger. If that box won't fit behind the lintel, it can go under the lintel or in front of the wall. We'll show you the clear height you'd keep with each option, so you can decide whether insulation is worth the trade-off.

Occasionally an opening has no headroom inside, no wall above it outside for a face-fitted box, and too little height to lose any under the lintel. There can still be options, such as altering the lintel, which is priced on survey. If we can't find a sensible solution, we'll tell you plainly rather than fit something that won't work.