Low-headroom roller garage doors in Banbury

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Banbury address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

At a survey in OX16 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Banbury garage so you can compare.

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Occasionally an opening has no headroom inside, no wall above it outside for a face-fitted box, and too little height to lose any under the lintel. There can still be options, such as altering the lintel, which is priced on survey. If we can't find a sensible solution, we'll tell you plainly rather than fit something that won't work.

Lath size is one of the things that decides box size, because larger laths make a bigger roll. On narrower doors a smaller lath can help where headroom is tight. On wider doors, though, larger laths add the rigidity the curtain needs, so there's a balance to strike. We recommend the lath at survey based on your width, height and headroom.