Sizes, finishes and features · KA13

Made-to-measure roller garage doors in Kilwinning

Garage openings in Kilwinning come in all sorts of sizes, which is why each door is made to measure. We survey, supply and fit throughout KA13, and the written quote sets out the exact sizes your door will be built to.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Kilwinning, KA13, KA20 and KA12
Area: Ayrshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Kilwinning?

Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Kilwinning?

At a free survey in Kilwinning, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Kilwinning?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Kilwinning and nearby

We survey and fit roller garage doors across Kilwinning, including KA13, KA20 and KA12, as part of our coverage in Ayrshire. Kilwinning is about 14 miles from Ayr.

Looking from a neighbouring town? We also cover Irvine (3 miles) and Troon (8 miles).

Rules that apply in Kilwinning

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need a building warrant from the local authority before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Kilwinning: questions

Do you charge more for Kilwinning than other towns in Ayrshire?

No. Guide prices are the same for Kilwinning as for anywhere else we cover in Ayrshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How long does it take to fit a roller garage door in Kilwinning?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do you cover Kilwinning?

Yes. Kilwinning is part of the area we cover in Ayrshire, including KA13, KA20 and KA12. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What do you check at a survey in KA13?

At a survey in KA13 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.