Sizes, finishes and features · BT30

Made-to-measure roller garage doors in Downpatrick

For a made-to-measure roller door in Downpatrick, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in County Down turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Downpatrick, BT30
Area: County Down

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Downpatrick?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.

How does it work in Downpatrick?

At a free survey in Downpatrick, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Downpatrick?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Downpatrick and nearby

If your garage is in Downpatrick (BT30), you can get a guide price online now, and we confirm any survey or visit date in writing.

Rules that apply in Downpatrick

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need building control approval from your council under the Building Regulations (Northern Ireland) 2012 before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Northern Ireland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or covenants can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Downpatrick: questions

Do you cover Downpatrick?

Yes. Downpatrick is part of the area we cover in County Down, including BT30. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is the survey in Downpatrick really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you charge more for Downpatrick than other towns in County Down?

No. Guide prices are the same for Downpatrick as for anywhere else we cover in County Down. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Downpatrick?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Downpatrick. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.