Sizes, finishes and features · EX4

Made-to-measure roller garage doors in Exeter

For a made-to-measure roller door in Exeter, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Devon turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Exeter, EX4, EX1 and EX2
Area: Devon

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Exeter?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.

How does it work in Exeter?

At a free survey in Exeter, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Exeter?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Exeter and nearby

Exeter is within the area we cover in Devon. Homes in EX4, EX1 and EX2 get the same survey, quote and fitting process as everywhere else we work.

Nearby, we also take enquiries from Exmouth, Tiverton and Newton Abbot.

Rules that apply in Exeter

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Exeter: questions

Do you charge more for Exeter than other towns in Devon?

No. Guide prices are the same for Exeter as for anywhere else we cover in Devon. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Is an electric roller door worth it for a garage in Exeter?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Exeter garage so you can compare.

Can I get a price for Exeter without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What do you check at a survey in EX4?

At a survey in EX4 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.