Sizes, finishes and features · BH15

Made-to-measure roller garage doors in Poole

Every roller garage door we fit in Poole is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Dorset before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Poole, BH15, BH14 and BH17
Area: Dorset

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Poole?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.

How does it work in Poole?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Poole?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Poole and nearby

Poole is within the area we cover in Dorset. Homes in BH15, BH14 and BH17 get the same survey, quote and fitting process as everywhere else we work. Poole lies around 20 miles from Dorchester.

Looking from a neighbouring town? We also cover Bournemouth (5 miles) and Christchurch (9 miles).

Rules that apply in Poole

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Poole: questions

What do you check at a survey in BH15?

At a survey in BH15 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do I need permission for a new roller garage door in Poole?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can I get a price for Poole without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Poole?

Yes. Poole is part of the area we cover in Dorset, including BH15, BH14 and BH17. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.