Sizes, finishes and features · HU1

Made-to-measure roller garage doors in Hull

We can fit made-to-measure roller garage doors in Hull and across HU1, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Hull, HU1, HU2 and HU3
Area: East Riding of Yorkshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Hull?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Hull?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Hull?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hull and nearby

Hull is a big place, so tell us your postcode when you ask for a price; we cover every HU district and confirm dates in writing. For reference, Hull sits roughly 8 miles from Beverley.

Rules that apply in Hull

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Hull: questions

Do you cover Hull?

Yes. Hull is part of the area we cover in the East Riding of Yorkshire, including HU1, HU2 and HU3. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How long does it take to fit a roller garage door in Hull?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

How much do made-to-measure roller garage doors cost in Hull?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Hull as elsewhere we cover.

Is an electric roller door worth it for a garage in Hull?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Hull garage so you can compare.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.