Sizes, finishes and features · TN40

Made-to-measure roller garage doors in Bexhill-on-Sea

For a made-to-measure roller door in Bexhill-on-Sea, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in East Sussex turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Bexhill-on-Sea, TN40 and TN39
Area: East Sussex

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Bexhill-on-Sea?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.

How does it work in Bexhill-on-Sea?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Bexhill-on-Sea?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Bexhill-on-Sea and nearby

We survey and fit roller garage doors across Bexhill-on-Sea, including TN40 and TN39, as part of our coverage in East Sussex. For reference, Bexhill-on-Sea sits roughly 27 miles from Brighton.

Other places close to Bexhill-on-Sea that we cover include Hastings, Hailsham and Eastbourne.

Rules that apply in Bexhill-on-Sea

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Bexhill-on-Sea: questions

Do you cover Bexhill-on-Sea?

Yes. Bexhill-on-Sea is part of the area we cover in East Sussex, including TN40 and TN39. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is an electric roller door worth it for a garage in Bexhill-on-Sea?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Bexhill-on-Sea garage so you can compare.

What do you check at a survey in TN40?

At a survey in TN40 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Is the survey in Bexhill-on-Sea really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.