Sizes, finishes and features · SS13

Made-to-measure roller garage doors in Pitsea

Every roller garage door we fit in Pitsea is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Essex before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Pitsea, SS13, SS14 and SS16
Area: Essex

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Pitsea?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Pitsea?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Pitsea?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Pitsea and nearby

We survey and fit roller garage doors across Pitsea, including SS13, SS14 and SS16, as part of our coverage in Essex. For reference, Pitsea sits roughly 12 miles from Chelmsford.

Looking from a neighbouring town? We also cover Basildon (2 miles) and South Benfleet (2 miles).

Rules that apply in Pitsea

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Pitsea: questions

Do you cover Pitsea?

Yes. Pitsea is part of the area we cover in Essex, including SS13, SS14 and SS16. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do I need permission for a new roller garage door in Pitsea?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Do you charge more for Pitsea than other towns in Essex?

No. Guide prices are the same for Pitsea as for anywhere else we cover in Essex. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can you remove my old garage door in Pitsea?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Pitsea address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.