Sizes, finishes and features · KY2

Made-to-measure roller garage doors in Kirkcaldy

We can fit made-to-measure roller garage doors in Kirkcaldy and across KY2, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Kirkcaldy, KY2 and KY1
Area: Fife

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Kirkcaldy?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.

How does it work in Kirkcaldy?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Kirkcaldy?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Kirkcaldy and nearby

Kirkcaldy is within the area we cover in Fife. Homes in KY2 and KY1 get the same survey, quote and fitting process as everywhere else we work. For reference, Kirkcaldy sits roughly 12 miles from Dunfermline.

Nearby, we also take enquiries from Glenrothes, Edinburgh and Kinross.

Rules that apply in Kirkcaldy

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need a building warrant from the local authority before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Kirkcaldy: questions

Do you cover Kirkcaldy?

Yes. Kirkcaldy is part of the area we cover in Fife, including KY2 and KY1. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Kirkcaldy without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How long does it take to fit a roller garage door in Kirkcaldy?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Is the survey in Kirkcaldy really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.