Sizes, finishes and features · EN5

Made-to-measure roller garage doors in Barnet

Garage openings in Barnet come in all sorts of sizes, which is why each door is made to measure. We survey, supply and fit throughout EN5, and the written quote sets out the exact sizes your door will be built to.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Barnet, EN5, EN4 and N20
Area: Greater London

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Barnet?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.

How does it work in Barnet?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Barnet?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Barnet and nearby

We survey and fit roller garage doors across Barnet, including EN5, EN4 and N20, as part of our coverage in Greater London. Barnet is about 11 miles from Westminster.

Nearby, we also take enquiries from Potters Bar, Borehamwood and Finchley.

Rules that apply in Barnet

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Barnet: questions

Can I get a price for Barnet without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How much do made-to-measure roller garage doors cost in Barnet?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Barnet as elsewhere we cover.

Do you charge more for Barnet than other towns in Greater London?

No. Guide prices are the same for Barnet as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can you remove my old garage door in Barnet?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Barnet address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.