Sizes, finishes and features · RM10

Made-to-measure roller garage doors in Dagenham

Garage openings in Dagenham come in all sorts of sizes, which is why each door is made to measure. We survey, supply and fit throughout RM10, and the written quote sets out the exact sizes your door will be built to.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Dagenham, RM10, RM9 and RM8
Area: Greater London

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Dagenham?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.

How does it work in Dagenham?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Dagenham?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Dagenham and nearby

We take enquiries from across Dagenham, from RM10 outwards, and confirm every price and date in writing before anything is ordered. Dagenham is about 14 miles from Westminster.

Other places close to Dagenham that we cover include Becontree, Romford and Hornchurch.

Rules that apply in Dagenham

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Dagenham: questions

Is the survey in Dagenham really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How much do made-to-measure roller garage doors cost in Dagenham?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Dagenham as elsewhere we cover.

How long does it take to fit a roller garage door in Dagenham?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can you remove my old garage door in Dagenham?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Dagenham address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.