Call 0800 088 6248

Sizes, finishes and features · SE10

Made-to-measure roller garage doors in Greenwich

Every roller garage door we fit in Greenwich is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Greater London before anything is ordered.

Guide price
from £1,495 inc VAT
First step
Free survey
Covers
Greenwich, SE10, SE8 and SE14
Surveyor measuring the width of an empty garage opening with a tape measureComputer-generated image

What should I know about made-to-measure roller garage doors in Greenwich?

  • Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
  • Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
  • Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
  • Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.

How does it work in Greenwich?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Greenwich?

ItemGuide price (inc VAT)Ex VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Greenwich and nearby

Greenwich is within the area we cover in Greater London. Homes in SE10, SE8 and SE14 get the same survey, quote and fitting process as everywhere else we work. For reference, Greenwich sits roughly 6 miles from Westminster.

We also cover Lewisham (1 mile), Blackheath (1 mile) and Canary Wharf (2 miles).

Rules that apply in Greenwich

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Greenwich: questions

Can I get a price for Greenwich without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Is the survey in Greenwich really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you cover Greenwich?

Yes. Greenwich is part of the area we cover in Greater London, including SE10, SE8 and SE14. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I message you a photo of my garage in Greenwich?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Greenwich. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.

Other roller door services in Greenwich

Made-to-measure roller garage doors in Greenwich

See a guide price in four steps, then book a free survey.

CallGuide price