Sizes, finishes and features · M6

Made-to-measure roller garage doors in Salford

Every roller garage door we fit in Salford is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Greater Manchester before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Salford, M6, M5 and M50
Area: Greater Manchester

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Salford?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Salford?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Salford?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Salford and nearby

If your garage is in Salford (M6, M5 and M50), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Salford sits roughly 2 miles from Manchester.

Other places close to Salford that we cover include Eccles, Manchester and Swinton.

Rules that apply in Salford

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Salford: questions

Can you remove my old garage door in Salford?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Salford address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Is the survey in Salford really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How much do made-to-measure roller garage doors cost in Salford?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Salford as elsewhere we cover.

Do I need permission for a new roller garage door in Salford?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.