Call 0800 088 6248

Sizes, finishes and features · NP4

Made-to-measure roller garage doors in Pontypool

We can fit made-to-measure roller garage doors in Pontypool and across NP4, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Guide price
from £1,495 inc VAT
First step
Free survey
Covers
Pontypool, NP4
Area
Gwent
Surveyor measuring the width of an empty garage opening with a tape measureComputer-generated image

What should I know about made-to-measure roller garage doors in Pontypool?

  • Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
  • Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
  • Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
  • Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.

How does it work in Pontypool?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Pontypool?

ItemGuide price (inc VAT)Ex VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Pontypool and nearby

We take enquiries from across Pontypool, from NP4 outwards, and confirm every price and date in writing before anything is ordered. Pontypool is about 8 miles from Newport.

Looking from a neighbouring town? We also cover Cwmbran (3 miles) and Risca (7 miles).

Rules that apply in Pontypool

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Pontypool: questions

Is the survey in Pontypool really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you charge more for Pontypool than other towns in Gwent?

No. Guide prices are the same for Pontypool as for anywhere else we cover in Gwent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Is an electric roller door worth it for a garage in Pontypool?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Pontypool garage so you can compare.

Do I need permission for a new roller garage door in Pontypool?

Replacing a garage door is not usually development that needs planning permission in Wales, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Other roller door services in Pontypool

Made-to-measure roller garage doors in Pontypool

See a guide price in four steps, then book a free survey.

CallGuide price