Sizes, finishes and features · EN8

Made-to-measure roller garage doors in Cheshunt

We can fit made-to-measure roller garage doors in Cheshunt and across EN8, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Cheshunt, EN8, EN7 and EN9
Area: Hertfordshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Cheshunt?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Cheshunt?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Cheshunt?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Cheshunt and nearby

Cheshunt is within the area we cover in Hertfordshire. Homes in EN8, EN7 and EN9 get the same survey, quote and fitting process as everywhere else we work. Cheshunt lies around 7 miles from Hertford.

Looking from a neighbouring town? We also cover Waltham Abbey (1 mile) and Enfield (4 miles).

Rules that apply in Cheshunt

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Cheshunt: questions

Can I get a price for Cheshunt without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Is an electric roller door worth it for a garage in Cheshunt?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Cheshunt garage so you can compare.

How long does it take to fit a roller garage door in Cheshunt?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

What do you check at a survey in EN8?

At a survey in EN8 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.