Sizes, finishes and features · TN9

Made-to-measure roller garage doors in Tonbridge

Garage openings in Tonbridge come in all sorts of sizes, which is why each door is made to measure. We survey, supply and fit throughout TN9, and the written quote sets out the exact sizes your door will be built to.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Tonbridge, TN9, TN11 and TN10
Area: Kent

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Tonbridge?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Tonbridge?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Tonbridge?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Tonbridge and nearby

Our coverage in Kent includes Tonbridge and the TN9, TN11 and TN10 postcode districts, so the same guide prices and written quotes apply here. Tonbridge lies around 12 miles from Maidstone.

Nearby, we also take enquiries from Tunbridge Wells, Sevenoaks and Crowborough.

Rules that apply in Tonbridge

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Tonbridge: questions

How long does it take to fit a roller garage door in Tonbridge?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do you charge more for Tonbridge than other towns in Kent?

No. Guide prices are the same for Tonbridge as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can you remove my old garage door in Tonbridge?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Tonbridge address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What do you check at a survey in TN9?

At a survey in TN9 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.