Call 0800 088 6248

Sizes, finishes and features · L32

Made-to-measure roller garage doors in Kirkby

For a made-to-measure roller door in Kirkby, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Merseyside turns them into exact order sizes.

Guide price
from £1,495 inc VAT
First step
Free survey
Covers
Kirkby, L32, L33 and L10
Surveyor measuring the width of an empty garage opening with a tape measureComputer-generated image

What should I know about made-to-measure roller garage doors in Kirkby?

  • Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
  • Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
  • Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
  • Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.

How does it work in Kirkby?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Kirkby?

ItemGuide price (inc VAT)Ex VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Kirkby and nearby

We survey and fit roller garage doors across Kirkby, including L32, L33 and L10, as part of our coverage in Merseyside. For reference, Kirkby sits roughly 6 miles from Liverpool.

We also cover Maghull (3 miles), Litherland (4 miles) and Prescot (5 miles).

Rules that apply in Kirkby

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Kirkby: questions

What do you check at a survey in L32?

At a survey in L32 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Kirkby than other towns in Merseyside?

No. Guide prices are the same for Kirkby as for anywhere else we cover in Merseyside. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Is an electric roller door worth it for a garage in Kirkby?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Kirkby garage so you can compare.

Is the survey in Kirkby really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Other roller door services in Kirkby

Made-to-measure roller garage doors in Kirkby

See a guide price in four steps, then book a free survey.

CallGuide price