Sizes, finishes and features · SY16

Made-to-measure roller garage doors in Newtown

For a made-to-measure roller door in Newtown, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Powys turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Newtown, SY16
Area: Powys

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Newtown?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.

How does it work in Newtown?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Newtown?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Newtown and nearby

We survey and fit roller garage doors across Newtown, including SY16, as part of our coverage in Powys.

Looking from a neighbouring town? We also cover Welshpool (12 miles) and Llandrindod Wells (19 miles).

Rules that apply in Newtown

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Newtown: questions

Is the survey in Newtown really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How long does it take to fit a roller garage door in Newtown?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do I need permission for a new roller garage door in Newtown?

Replacing a garage door is not usually development that needs planning permission in Wales, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

What do you check at a survey in SY16?

At a survey in SY16 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.