Sizes, finishes and features · DN1

Made-to-measure roller garage doors in Doncaster

Every roller garage door we fit in Doncaster is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in South Yorkshire before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Doncaster, DN1, DN4 and DN2
Area: South Yorkshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Doncaster?

Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.

How does it work in Doncaster?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Doncaster?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Doncaster and nearby

If your garage is in Doncaster (DN1, DN4 and DN2), you can get a guide price online now, and we confirm any survey or visit date in writing. Doncaster lies around 17 miles from Sheffield.

We also cover Bentley (1 mile), Rotherham (11 miles) and Chapeltown (15 miles).

Rules that apply in Doncaster

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Doncaster: questions

How much do made-to-measure roller garage doors cost in Doncaster?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Doncaster as elsewhere we cover.

How long does it take to fit a roller garage door in Doncaster?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do you cover Doncaster?

Yes. Doncaster is part of the area we cover in South Yorkshire, including DN1, DN4 and DN2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is an electric roller door worth it for a garage in Doncaster?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Doncaster garage so you can compare.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.