Sizes, finishes and features · ST3

Made-to-measure roller garage doors in Longton

Every roller garage door we fit in Longton is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Staffordshire before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Longton, ST3, ST4 and ST12
Area: Staffordshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Longton?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.

How does it work in Longton?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Longton?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Longton and nearby

We survey and fit roller garage doors across Longton, including ST3, ST4 and ST12, as part of our coverage in Staffordshire. For reference, Longton sits roughly 12 miles from Stafford.

We also cover Stoke-on-Trent (3 miles), Newcastle-under-Lyme (4 miles) and Kidsgrove (8 miles).

Rules that apply in Longton

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Longton: questions

Can I message you a photo of my garage in Longton?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Longton. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How much do made-to-measure roller garage doors cost in Longton?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Longton as elsewhere we cover.

Can I get a price for Longton without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What do you check at a survey in ST3?

At a survey in ST3 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.