Sizes, finishes and features · ST16

Made-to-measure roller garage doors in Stafford

Garage openings in Stafford come in all sorts of sizes, which is why each door is made to measure. We survey, supply and fit throughout ST16, and the written quote sets out the exact sizes your door will be built to.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Stafford, ST16, ST17 and ST18
Area: Staffordshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Stafford?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Stafford?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Stafford?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Stafford and nearby

If your garage is in Stafford (ST16, ST17 and ST18), you can get a guide price online now, and we confirm any survey or visit date in writing.

Looking from a neighbouring town? We also cover Rugeley (8 miles) and Cannock (9 miles).

Rules that apply in Stafford

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Stafford: questions

Do you cover Stafford?

Yes. Stafford is part of the area we cover in Staffordshire, including ST16, ST17 and ST18. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Stafford without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How long does it take to fit a roller garage door in Stafford?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do I need permission for a new roller garage door in Stafford?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.