Sizes, finishes and features · B79

Made-to-measure roller garage doors in Tamworth

We can fit made-to-measure roller garage doors in Tamworth and across B79, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Tamworth, B79, B77 and B78
Area: Staffordshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Tamworth?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Tamworth?

At a free survey in Tamworth, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Tamworth?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Tamworth and nearby

If your garage is in Tamworth (B79, B77 and B78), you can get a guide price online now, and we confirm any survey or visit date in writing. Tamworth lies around 21 miles from Stafford.

Looking from a neighbouring town? We also cover Lichfield (6 miles) and Sutton Coldfield (7 miles).

Rules that apply in Tamworth

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Tamworth: questions

Do I need permission for a new roller garage door in Tamworth?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Do you cover Tamworth?

Yes. Tamworth is part of the area we cover in Staffordshire, including B79, B77 and B78. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you charge more for Tamworth than other towns in Staffordshire?

No. Guide prices are the same for Tamworth as for anywhere else we cover in Staffordshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can you remove my old garage door in Tamworth?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Tamworth address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.