Sizes, finishes and features · KT17

Made-to-measure roller garage doors in Ewell

We can fit made-to-measure roller garage doors in Ewell and across KT17, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Ewell, KT17, KT19 and KT4
Area: Surrey

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Ewell?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Ewell?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Ewell?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Ewell and nearby

Ewell is within the area we cover in Surrey. Homes in KT17, KT19 and KT4 get the same survey, quote and fitting process as everywhere else we work. Ewell is about 16 miles from Guildford.

We also cover Epsom (2 miles), Sutton (2 miles) and Banstead (3 miles).

Rules that apply in Ewell

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Ewell: questions

Can you remove my old garage door in Ewell?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Ewell address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do you cover Ewell?

Yes. Ewell is part of the area we cover in Surrey, including KT17, KT19 and KT4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What do you check at a survey in KT17?

At a survey in KT17 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do I need permission for a new roller garage door in Ewell?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.