Sizes, finishes and features · WS10

Made-to-measure roller garage doors in Wednesbury

Every roller garage door we fit in Wednesbury is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in the West Midlands before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Wednesbury, WS10, WS2 and WS1
Area: West Midlands

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Wednesbury?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.

How does it work in Wednesbury?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Wednesbury?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Wednesbury and nearby

Wednesbury is within the area we cover in the West Midlands. Homes in WS10, WS2 and WS1 get the same survey, quote and fitting process as everywhere else we work. Wednesbury is about 7 miles from Birmingham.

We also cover Tipton (2 miles), West Bromwich (3 miles) and Willenhall (3 miles).

Rules that apply in Wednesbury

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Wednesbury: questions

How long does it take to fit a roller garage door in Wednesbury?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

What do you check at a survey in WS10?

At a survey in WS10 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Is the survey in Wednesbury really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you cover Wednesbury?

Yes. Wednesbury is part of the area we cover in the West Midlands, including WS10, WS2 and WS1. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.