Sizes, finishes and features · WF1

Made-to-measure roller garage doors in Wakefield

For a made-to-measure roller door in Wakefield, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in West Yorkshire turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Wakefield, WF1, WF2 and WF4
Area: West Yorkshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Wakefield?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Wakefield?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Wakefield?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Wakefield and nearby

If your garage is in Wakefield (WF1, WF2 and WF4), you can get a guide price online now, and we confirm any survey or visit date in writing. Wakefield lies around 8 miles from Leeds.

Nearby, we also take enquiries from Ossett, Dewsbury and Morley.

Rules that apply in Wakefield

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Wakefield: questions

Can I get a price for Wakefield without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Is the survey in Wakefield really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Can you remove my old garage door in Wakefield?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Wakefield address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What do you check at a survey in WF1?

At a survey in WF1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.