Sizes, finishes and features · SP1

Made-to-measure roller garage doors in Salisbury

Every roller garage door we fit in Salisbury is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Wiltshire before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Salisbury, SP1 and SP2
Area: Wiltshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Salisbury?

Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.

How does it work in Salisbury?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Salisbury?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Salisbury and nearby

Our coverage in Wiltshire includes Salisbury and the SP1 and SP2 postcode districts, so the same guide prices and written quotes apply here. For reference, Salisbury sits roughly 25 miles from Trowbridge.

Rules that apply in Salisbury

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Salisbury: questions

Is the survey in Salisbury really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Is an electric roller door worth it for a garage in Salisbury?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Salisbury garage so you can compare.

What do you check at a survey in SP1?

At a survey in SP1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do I need permission for a new roller garage door in Salisbury?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.