Roller door types · CH1

Manual roller garage doors in Chester

For a garage in Chester without electrics, a manual roller door works by hand, with springs in the barrel balancing the curtain. We survey and fit them in Cheshire, from single openings up to doubles of 4 m wide.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Chester, CH1 and CH2
Area: Cheshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Chester?

Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.

How does it work in Chester?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Chester?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Chester and nearby

If your garage is in Chester (CH1 and CH2), you can get a guide price online now, and we confirm any survey or visit date in writing.

We also cover Hawarden (6 miles), Deeside (6 miles) and Ellesmere Port (6 miles).

Rules that apply in Chester

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Manual roller garage doors in Chester: questions

Is the survey in Chester really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Can you remove my old garage door in Chester?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Chester address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do you cover Chester?

Yes. Chester is part of the area we cover in Cheshire, including CH1 and CH2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Chester without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.

Is a manual roller door a good fit for a garage court or lock-up?

Often, yes. Manual roller doors are practical for private garage courts and lock-ups owned by landlords, residents' associations or management companies, especially where individual garages have no power. We can survey and price several doors together, and each opening is measured separately so every door is made for its own opening.