Roller door types · LL29

Manual roller garage doors in Colwyn Bay

Need a simple manual roller garage door in Colwyn Bay? We supply and fit spring-assisted single-skin doors in Clwyd, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Colwyn Bay, LL29 and LL28
Area: Clwyd

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Colwyn Bay?

Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.

How does it work in Colwyn Bay?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Colwyn Bay?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Colwyn Bay and nearby

We survey and fit roller garage doors across Colwyn Bay, including LL29 and LL28, as part of our coverage in Clwyd. Colwyn Bay is about 35 miles from Wrexham.

Looking from a neighbouring town? We also cover Llandudno (5 miles) and Rhyl (10 miles).

Rules that apply in Colwyn Bay

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Colwyn Bay: questions

Is an electric roller door worth it for a garage in Colwyn Bay?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Colwyn Bay garage so you can compare.

Do I need permission for a new roller garage door in Colwyn Bay?

Replacing a garage door is not usually development that needs planning permission in Wales, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Do you cover Colwyn Bay?

Yes. Colwyn Bay is part of the area we cover in Clwyd, including LL29 and LL28. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can you remove my old garage door in Colwyn Bay?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Colwyn Bay address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.