Roller door types · TS23

Manual roller garage doors in Billingham

We cover Billingham for manual roller garage doors, including lock-ups and garage courts with several openings. Get a guide price online using your measurements, and we'll arrange a free survey in County Durham to check the lintel, side room and floor.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Billingham, TS23, TS20 and TS2
Area: County Durham

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Billingham?

Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.

How does it work in Billingham?

Start with the online quote tool by choosing a manual door and entering the width and height of your opening. The guide price includes fitting and taking away your old door.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Billingham?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Billingham and nearby

Our coverage in County Durham includes Billingham and the TS23, TS20 and TS2 postcode districts, so the same guide prices and written quotes apply here. Billingham lies around 17 miles from Durham.

Looking from a neighbouring town? We also cover Stockton-on-Tees (2 miles) and Middlesbrough (2 miles).

Rules that apply in Billingham

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Manual roller garage doors in Billingham: questions

Do I need permission for a new roller garage door in Billingham?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can you remove my old garage door in Billingham?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Billingham address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Is the survey in Billingham really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How long does it take to fit a roller garage door in Billingham?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.