Roller door types · CM1

Manual roller garage doors in Chelmsford

Need a simple manual roller garage door in Chelmsford? We supply and fit spring-assisted single-skin doors in Essex, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Chelmsford, CM1 and CM2
Area: Essex

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Chelmsford?

Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.

How does it work in Chelmsford?

We then book a free survey in Chelmsford to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Chelmsford?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Chelmsford and nearby

Our coverage in Essex includes Chelmsford and the CM1 and CM2 postcode districts, so the same guide prices and written quotes apply here.

Looking from a neighbouring town? We also cover Billericay (8 miles) and Witham (8 miles).

Rules that apply in Chelmsford

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Manual roller garage doors in Chelmsford: questions

How long does it take to fit a roller garage door in Chelmsford?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I get a price for Chelmsford without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Chelmsford?

Yes. Chelmsford is part of the area we cover in Essex, including CM1 and CM2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can you remove my old garage door in Chelmsford?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Chelmsford address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Is a manual roller door a good fit for a garage court or lock-up?

Often, yes. Manual roller doors are practical for private garage courts and lock-ups owned by landlords, residents' associations or management companies, especially where individual garages have no power. We can survey and price several doors together, and each opening is measured separately so every door is made for its own opening.