Roller door types · SS7

Manual roller garage doors in South Benfleet

We cover South Benfleet for manual roller garage doors, including lock-ups and garage courts with several openings. Get a guide price online using your measurements, and we'll arrange a free survey in Essex to check the lintel, side room and floor.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: South Benfleet, SS7, SS8 and SS13
Area: Essex

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in South Benfleet?

Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.

How does it work in South Benfleet?

We then book a free survey in South Benfleet to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in South Benfleet?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering South Benfleet and nearby

If your garage is in South Benfleet (SS7, SS8 and SS13), you can get a guide price online now, and we confirm any survey or visit date in writing. South Benfleet lies around 13 miles from Chelmsford.

Nearby, we also take enquiries from Pitsea, Canvey Island and Rayleigh.

Rules that apply in South Benfleet

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Manual roller garage doors in South Benfleet: questions

Can you remove my old garage door in South Benfleet?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your South Benfleet address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Can I get a price for South Benfleet without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover South Benfleet?

Yes. South Benfleet is part of the area we cover in Essex, including SS7, SS8 and SS13. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you charge more for South Benfleet than other towns in Essex?

No. Guide prices are the same for South Benfleet as for anywhere else we cover in Essex. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.