Manual roller garage doors in Yate

At a survey in BS37 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Yate address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Often, yes. Manual roller doors are practical for private garage courts and lock-ups owned by landlords, residents' associations or management companies, especially where individual garages have no power. We can survey and price several doors together, and each opening is measured separately so every door is made for its own opening.

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.