Roller door types · WN4

Manual roller garage doors in Ashton-in-Makerfield

For a garage in Ashton-in-Makerfield without electrics, a manual roller door works by hand, with springs in the barrel balancing the curtain. We survey and fit them in Greater Manchester, from single openings up to doubles of 4 m wide.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Ashton-in-Makerfield, WN4, WA12 and WA11
Area: Greater Manchester

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Ashton-in-Makerfield?

If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.

How does it work in Ashton-in-Makerfield?

We then book a free survey in Ashton-in-Makerfield to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Ashton-in-Makerfield?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Ashton-in-Makerfield and nearby

We take enquiries from across Ashton-in-Makerfield, from WN4 outwards, and confirm every price and date in writing before anything is ordered. Ashton-in-Makerfield lies around 17 miles from Manchester.

Looking from a neighbouring town? We also cover Golborne (2 miles) and Newton-le-Willows (3 miles).

Rules that apply in Ashton-in-Makerfield

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Manual roller garage doors in Ashton-in-Makerfield: questions

How long does it take to fit a roller garage door in Ashton-in-Makerfield?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

What do you check at a survey in WN4?

At a survey in WN4 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I message you a photo of my garage in Ashton-in-Makerfield?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Ashton-in-Makerfield. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you cover Ashton-in-Makerfield?

Yes. Ashton-in-Makerfield is part of the area we cover in Greater Manchester, including WN4, WA12 and WA11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.