Roller door types · M34

Manual roller garage doors in Denton

Swapping a worn-out door on a garage in Denton for a manual roller door is a straightforward job. We can fit anywhere in M34, and the written quote confirms the door, finish and lock before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Denton, M34, M18 and M43
Area: Greater Manchester

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Denton?

Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.

How does it work in Denton?

We then book a free survey in Denton to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Denton?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Denton and nearby

Denton is within the area we cover in Greater Manchester. Homes in M34, M18 and M43 get the same survey, quote and fitting process as everywhere else we work. Denton is about 5 miles from Manchester.

We also cover Hyde (2 miles), Dukinfield (2 miles) and Droylsden (2 miles).

Rules that apply in Denton

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Manual roller garage doors in Denton: questions

What do you check at a survey in M34?

At a survey in M34 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Denton than other towns in Greater Manchester?

No. Guide prices are the same for Denton as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can you remove my old garage door in Denton?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Denton address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

How much do manual roller garage doors cost in Denton?

Our guide price for manual roller garage doors is from £895 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Denton as elsewhere we cover.

Is a manual roller door a good fit for a garage court or lock-up?

Often, yes. Manual roller doors are practical for private garage courts and lock-ups owned by landlords, residents' associations or management companies, especially where individual garages have no power. We can survey and price several doors together, and each opening is measured separately so every door is made for its own opening.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.