Roller door types · NP4

Manual roller garage doors in Pontypool

We cover Pontypool for manual roller garage doors, including lock-ups and garage courts with several openings. Get a guide price online using your measurements, and we'll arrange a free survey in Gwent to check the lintel, side room and floor.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Pontypool, NP4
Area: Gwent

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Pontypool?

Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.

How does it work in Pontypool?

Start with the online quote tool by choosing a manual door and entering the width and height of your opening. The guide price includes fitting and taking away your old door.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Pontypool?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Pontypool and nearby

Our coverage in Gwent includes Pontypool and the NP4 postcode district, so the same guide prices and written quotes apply here. Pontypool lies around 8 miles from Newport.

We also cover Cwmbran (3 miles), Risca (7 miles) and Newport (Gwent) (8 miles).

Rules that apply in Pontypool

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Manual roller garage doors in Pontypool: questions

Do you cover Pontypool?

Yes. Pontypool is part of the area we cover in Gwent, including NP4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much do manual roller garage doors cost in Pontypool?

Our guide price for manual roller garage doors is from £895 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Pontypool as elsewhere we cover.

Can I get a price for Pontypool without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can I message you a photo of my garage in Pontypool?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Pontypool. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.