Roller door types · PO7

Manual roller garage doors in Waterlooville

We cover Waterlooville for manual roller garage doors, including lock-ups and garage courts with several openings. Get a guide price online using your measurements, and we'll arrange a free survey in Hampshire to check the lintel, side room and floor.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Waterlooville, PO7, PO8 and PO9
Area: Hampshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Waterlooville?

Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.

How does it work in Waterlooville?

We then book a free survey in Waterlooville to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Waterlooville?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Waterlooville and nearby

Waterlooville is within the area we cover in Hampshire. Homes in PO7, PO8 and PO9 get the same survey, quote and fitting process as everywhere else we work. Waterlooville lies around 18 miles from Winchester.

Nearby, we also take enquiries from Havant, Portsmouth and Fareham.

Rules that apply in Waterlooville

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Manual roller garage doors in Waterlooville: questions

Do you cover Waterlooville?

Yes. Waterlooville is part of the area we cover in Hampshire, including PO7, PO8 and PO9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Waterlooville without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What do you check at a survey in PO7?

At a survey in PO7 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can you remove my old garage door in Waterlooville?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Waterlooville address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.