Roller door types · EN6

Manual roller garage doors in Potters Bar

Manual roller doors are the lowest-cost route to a roller garage door, and we can fit them in Potters Bar and throughout EN6. Each price includes removing your old roller or up-and-over door, and a free survey confirms the measurements first.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Potters Bar, EN6
Area: Hertfordshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Potters Bar?

Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.

How does it work in Potters Bar?

We then book a free survey in Potters Bar to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Potters Bar?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Potters Bar and nearby

We take enquiries from across Potters Bar, from EN6 outwards, and confirm every price and date in writing before anything is ordered. For reference, Potters Bar sits roughly 8 miles from Hertford.

Nearby, we also take enquiries from Barnet, Enfield and Borehamwood.

Rules that apply in Potters Bar

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Potters Bar: questions

How much do manual roller garage doors cost in Potters Bar?

Our guide price for manual roller garage doors is from £895 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Potters Bar as elsewhere we cover.

Is the survey in Potters Bar really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Can I message you a photo of my garage in Potters Bar?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Potters Bar. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How long does it take to fit a roller garage door in Potters Bar?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I have insulated laths on a manual roller door?

Our manual doors use single-skin aluminium laths, and the insulated doors in our price list are electric. So if a warmer, quieter garage is what you're after, you'd be looking at an insulated electric door. Compare the two price bands for your width and think about how you use the space before deciding whether the extra cost is worth it.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.