Roller door types · CT11

Manual roller garage doors in Ramsgate

Need a simple manual roller garage door in Ramsgate? We supply and fit spring-assisted single-skin doors in Kent, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Ramsgate, CT11, CT10 and CT12
Area: Kent

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Ramsgate?

Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.

How does it work in Ramsgate?

We then book a free survey in Ramsgate to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Ramsgate?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Ramsgate and nearby

If your garage is in Ramsgate (CT11, CT10 and CT12), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Ramsgate sits roughly 39 miles from Maidstone.

We also cover Broadstairs (2 miles), Margate (3 miles) and Deal (8 miles).

Rules that apply in Ramsgate

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Ramsgate: questions

What do you check at a survey in CT11?

At a survey in CT11 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can you remove my old garage door in Ramsgate?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Ramsgate address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do you cover Ramsgate?

Yes. Ramsgate is part of the area we cover in Kent, including CT11, CT10 and CT12. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is the survey in Ramsgate really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Is a manual roller door a good fit for a garage court or lock-up?

Often, yes. Manual roller doors are practical for private garage courts and lock-ups owned by landlords, residents' associations or management companies, especially where individual garages have no power. We can survey and price several doors together, and each opening is measured separately so every door is made for its own opening.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.