Roller door types · LA1

Manual roller garage doors in Lancaster

Need a simple manual roller garage door in Lancaster? We supply and fit spring-assisted single-skin doors in Lancashire, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Lancaster, LA1 and LA4
Area: Lancashire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Lancaster?

Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.

How does it work in Lancaster?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Lancaster?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Lancaster and nearby

Our coverage in Lancashire includes Lancaster and the LA1 and LA4 postcode districts, so the same guide prices and written quotes apply here. For reference, Lancaster sits roughly 20 miles from Preston.

Nearby, we also take enquiries from Morecambe, Fleetwood and Thornton-Cleveleys.

Rules that apply in Lancaster

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Lancaster: questions

What do you check at a survey in LA1?

At a survey in LA1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can you remove my old garage door in Lancaster?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Lancaster address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Do I need permission for a new roller garage door in Lancaster?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Do you cover Lancaster?

Yes. Lancaster is part of the area we cover in Lancashire, including LA1 and LA4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.