Roller door types · NG18

Manual roller garage doors in Mansfield

Need a simple manual roller garage door in Mansfield? We supply and fit spring-assisted single-skin doors in Nottinghamshire, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Mansfield, NG18, NG19 and NG17
Area: Nottinghamshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Mansfield?

Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.

How does it work in Mansfield?

Start with the online quote tool by choosing a manual door and entering the width and height of your opening. The guide price includes fitting and taking away your old door.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Mansfield?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Mansfield and nearby

Mansfield is within the area we cover in Nottinghamshire. Homes in NG18, NG19 and NG17 get the same survey, quote and fitting process as everywhere else we work. Mansfield is about 13 miles from Nottingham.

Nearby, we also take enquiries from Sutton-in-Ashfield, Kirkby-in-Ashfield and Hucknall.

Rules that apply in Mansfield

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Manual roller garage doors in Mansfield: questions

What do you check at a survey in NG18?

At a survey in NG18 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you cover Mansfield?

Yes. Mansfield is part of the area we cover in Nottinghamshire, including NG18, NG19 and NG17. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do I need permission for a new roller garage door in Mansfield?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Is the survey in Mansfield really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.