Call 0800 088 6248

Roller door types · OX1

Manual roller garage doors in Oxford

We cover Oxford for manual roller garage doors, including lock-ups and garage courts with several openings. Get a guide price online using your measurements, and we'll arrange a free survey in Oxfordshire to check the lintel, side room and floor.

Guide price
from £895 inc VAT
First step
Free survey
Covers
Oxford, OX1, OX2 and OX3
White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel driveComputer-generated image

What should I know about manual roller garage doors in Oxford?

  • Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
  • Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
  • Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
  • Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.

How does it work in Oxford?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Oxford?

ItemGuide price (inc VAT)Ex VAT
Manual roller door, single opening up to 2.4 m£895–£1,295£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m£1,095–£1,545£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m£1,395–£1,995£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Oxford and nearby

We survey and fit roller garage doors across Oxford, including OX1, OX2 and OX3, as part of our coverage in Oxfordshire.

Other places close to Oxford that we cover include Abingdon, Didcot and Witney.

Rules that apply in Oxford

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Oxford: questions

Can you remove my old garage door in Oxford?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Oxford address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Is the survey in Oxford really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you cover Oxford?

Yes. Oxford is part of the area we cover in Oxfordshire, including OX1, OX2 and OX3. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

What do you check at a survey in OX1?

At a survey in OX1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I have insulated laths on a manual roller door?

Our manual doors use single-skin aluminium laths, and the insulated doors in our price list are electric. So if a warmer, quieter garage is what you're after, you'd be looking at an insulated electric door. Compare the two price bands for your width and think about how you use the space before deciding whether the extra cost is worth it.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Other roller door services in Oxford

Manual roller garage doors in Oxford

See a guide price in four steps, then book a free survey.

CallGuide price