Roller door types · LD3

Manual roller garage doors in Brecon

Manual roller doors are the lowest-cost route to a roller garage door, and we can fit them in Brecon and throughout LD3. Each price includes removing your old roller or up-and-over door, and a free survey confirms the measurements first.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Brecon, LD3
Area: Powys

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Brecon?

Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.

How does it work in Brecon?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Brecon?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Brecon and nearby

We take enquiries from across Brecon, from LD3 outwards, and confirm every price and date in writing before anything is ordered. For reference, Brecon sits roughly 40 miles from Newtown.

Rules that apply in Brecon

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Manual roller garage doors in Brecon: questions

How long does it take to fit a roller garage door in Brecon?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

What do you check at a survey in LD3?

At a survey in LD3 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Brecon than other towns in Powys?

No. Guide prices are the same for Brecon as for anywhere else we cover in Powys. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How much do manual roller garage doors cost in Brecon?

Our guide price for manual roller garage doors is from £895 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Brecon as elsewhere we cover.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.