Roller door types · TF1

Manual roller garage doors in Wellington

Swapping a worn-out door on a garage in Wellington for a manual roller door is a straightforward job. We can fit anywhere in TF1, and the written quote confirms the door, finish and lock before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Wellington, TF1, TF5 and TF6
Area: Shropshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Wellington?

Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.

How does it work in Wellington?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Wellington?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Wellington and nearby

We survey and fit roller garage doors across Wellington, including TF1, TF5 and TF6, as part of our coverage in Shropshire. For reference, Wellington sits roughly 10 miles from Shrewsbury.

Other places close to Wellington that we cover include Telford, Shrewsbury and Bridgnorth.

Rules that apply in Wellington

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Manual roller garage doors in Wellington: questions

Can you remove my old garage door in Wellington?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Wellington address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What do you check at a survey in TF1?

At a survey in TF1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Wellington than other towns in Shropshire?

No. Guide prices are the same for Wellington as for anywhere else we cover in Shropshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Wellington?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Wellington. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Do manual roller doors need servicing?

They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.